DSACON32-S
The powerful Sensor Controller DSACON32-S is suitable especially for use under laboratory conditions or whenever a maximum flexibilty of the sensor system is necessary.
Besides of an LC-Display to display status information, the DSACON32-S comes by default with a RS232 serial interface and a USB 2.0 connector.
The Tactile Transducer is connected using a 25-Pin Sub-D plug connector. The DSACON32-S can sample transducers with up to 30,000 sensor cells. A wall power supply is provided.
Technische Daten
| Power Supply |
10 - 24 V DC, typ. 12 V DC |
| Power Consumption |
1 W bei 12 V |
| Integrated Interfaces |
RS232 (115.2 kBit/s), USB 2.0 (full speed) |
| Maximum Size of Transducer |
30,000 sensor cells |
| Maximum Sampling Rate |
1.2 MSPS |
| ADC Resolution |
12 Bit |
| Signal Noise Ratio |
68 dB (at f = 20 kHz) |
| Power Out to supply Transducer | 5 V / 300 mA |
| Dimensions (L x W x H) | 150 x 86 x 40 mm |
| Weight | 320 g |
| Temperature Range |
0 to 40 °C |
| Sensor Port | 25-Pin Sub-D Connector |
Documentation
The documentation for this product can be found in our tactile sensing download area.
Delivery Scope
- DSACON32-S
- Documentation on CD
- Data capture software DSA Explorer Basic Edition
- RS232 and USB connector cables
- Wall power supply
Additional Accessories
- Adapter cable to connect different transducers
- Mounting Kit (MS DSACON32-S)
To be combined with
- Standard and customer-specific Tactile Transducers by Weiss Robotics
- Data capture and presentation software DSA Explorer
